How To Get Water Out Of Your Phone Charging Port

Water can enter charging ports in a lot of different ways. Even the most careful of smartphone users might find themselves with a wet phone port. Fortunately, there are fast and easy ways to dry out the fluids. So what are these ways and how to get water out of the charging port?

To get the water out of the charging port, turn the phone off and gently shake it while keeping the lightning connector facing downwards. Place a towel against the lightning port to soak up the water. Ensure you press firmly on both the port and the other side of the phone.

This article will explain how to get water out of the phone's charging port on any device. And what steps are needed for drying them off completely? It also covers tips for preventing the device from damage and saving the cost of repairing.

How To Get Water Out Of Charging Port?
- 1. Use a toothpick
- 2. Blow air into the lightning port
- 3. Use rice
  - 4. Put your phone in a container with uncooked rice for at least 20 minutes, then remove and let dry
  - 5. Put your phone in rice for 12 hours
- 6. Use compressed air
- 7. Contact customer support(From another device)
- 8. Wrap with a paper towel
- 9. Vacuum suction
- 10. Cotton swab or cloth
- 11. Rubbing alcohol
- 12. Distilled white vinegar
- 13. Use old fabric
- 14. Use Sunlight
- 15. Heat using a hairdryer(Be careful)
How to get water out of the charging port quickly?
How to get the moisture out of your Android phone's charging port?
How to remove water from the iPhone XS, iPhone Xs Max, and iPhone XR charging port?
- iPhone XS, iPhone Xs Max, and iPhone XR are water-resistant phones.
How do I clean the charging port on a Samsung phone?
How to get water out of the phone's charging port without rice?
- #1. Use a dry towel
- #2. Contact customer support
- #3. Remove any debris stuck inside the charging port
- #4. Just wait for the water to fall out of its own accord
What is inside the phone's charging port?
Can water in the phone charging port damage it?
- What are the advantages of water-resistant phones?
Can water damage Apple's lightning cable and lightning port?
Can I charge my wet phone if the device supports wireless charging?
What to do and avoid if water gets into your phone?

How To Get Water Out Of Charging Port?

The vital first step is to turn the phone off till the water is completely gone.

After that, start by removing any SIM cards or memory cards and battery(if possible) or power source from your device to avoid damage to the port or the phone panel.

Also, Remove the lightning cable from the lightning port or the wireless charger.

Low electricity flowing from the battery to the panel won't damage the phone, but current from the water will.

Use any of these 15 simple ways to dry your charging port after you have turned your phone off. Getting rid of the moisture will be as easy as deleting the apps.

1. Use a toothpick

Use a toothpick to get water out of the phone charging port.

The Smartphone USB port is compact and small. Use a toothpick or a needle or paper pin to scoop the water out of the lightning port.

Now gently tap the phone with the charging port facing the ground.

Turn the phone on to check for advice messages on the screen.

If you don't see any moisture warning message, you are good to use your smartphone.

2. Blow air into the lightning port

Precaution: When blowing air, make sure your mouth is dry, else you might spray saliva into the port to make things worse.

Blow into the lightning port to loosen any debris or liquid that is preventing it from working.

You can also use the force of the air from a fan. Put the face of the charging port in front of a fan.

It will completely dry the charging port if the air temperature is high.

Connect the lightning connector and the lightning port to charge the phone. Monitor the battery usage for any abnormal signs.

3. Use rice

If the previous instructions could not get water out of the phone charging port, use dry uncooked rice.

Add some rice in a container or a bag and submerge the phone to absorb excess moisture.

Although the internet community is biased on the effectiveness of this method, it's still used by many.

Use rice in two ways…

4. Put your phone in a container with uncooked rice for at least 20 minutes, then remove and let dry

Be careful while following this step, as the starch from the dry rice may interact with the water and make your phone sticky.

5. Put your phone in rice for 12 hours

Cover your smartphone with a cloth if your phone has a cracked screen. Dry rice will absorb the moisture and might get water out of the phone.

Keep the phone in this condition for at least 12 hours and then try to turn it on.

6. Use compressed air

Compressed air can clean the phone connection port by pressure — *Compressed air can clean the port* by pressure

Try using compressed air to clean out your charging port (be careful not to push anything further in).

Make sure of any debris near the face of the charging port, then use a compressed air can with a straw to force the pressure in and debris out.

It is one of the quickest ways to get water out of the USB charging ports. And the best way to clean the lightning point of any dust or slug.

This point helps save the phone charging port if the amount of water in the charging port is high.

Although this won't help you take moisture out of the phone charging port or the phone itself, it will remove the bulk of the water from the phone charging port.

You can repeat this process many times till you think the phone's charging port is safe to use. For moisture, use any of the heating processes mentioned in the following easy ways.

7. Contact customer support(From another device)

When all else fails, the best solution is to take the device into the store to request service or replacement. Any parts that may have become defective or broken due to liquid exposure.

For an android device, check with your phone customer support about the service and warranty. Warranty and service conditions vary from brand to brand.

Use an alternate phone borrowed from a family member or friend.

Don't turn your phone on to make the call. Never use the phone's charging port in any way(don't connect any lightning accessory) before talking to customer support.

8. Wrap with a paper towel

Get some tape or paper towel and wrap it tightly around the port.

Paper towels have instantaneous water absorbing capacity. You might need to use different portions of a single paper towel.

Softer paper towels get folded into pointed edges. And these edges can go deep into the charging port or USB port to get water out.

Keep repeating till the edge of the paper towel comes out dry.

9. Vacuum suction

Take a vacuum cleaner to suck all the water out of the device.

Place the vacuum hose exactly attached to the surface of the device with the charging port directly facing the hose.

This method is most effective if the phone gets soaked in liquid.

10. Cotton swab or cloth

Use a cotton swab or a soft cloth to soak up any remaining water inside the lightning port.

Place the cotton swab or the cloth on the face of the phone's charging port. Press the cotton swab on the opening of the lightning port. Contact should be as tight as possible.

Repeat this process two to three times with multiple swabs.

Cotton is a highly absorbent material. The water droplets get trapped inside the cotton fibers.

Charging ports are tiny, but the cotton fibers are micro. Make sure to pick these left behind fiber strands out with a tweezer.

11. Rubbing alcohol

Get some rubbing alcohol and soak it with a cotton swab and clean the lightning connector.

Alcohol and spirit have an evaporating effect. That's why they are used primarily for cleaning phones and electronic boards.

12. Distilled white vinegar

Get some distilled white vinegar.

Vinegar has a cleansing effect. Mix it with the distilled water and try to clean the port. Use a swab and a needle.

13. Use old fabric

Lay an old t-shirt over your charger port and keep it overnight. Old fabrics are worn off and have high water-absorbing quality.

Keeping the phone in this condition will absorb the moisture.

14. Use Sunlight

Place your phone in the sun, with the charging port facing the sun directly.

Solar heating will evaporate the water molecules and get rid of the moisture completely.

This method is super effective. It can completely get rid of the moisture from the entire device. For maximum impact, take apart all the removable parts.

Place all the parts in the Sunlight for the entirety of the day.

15. Heat using a hairdryer(Be careful)

A hairdryer to blow hot air into the phone's charging port — *A hairdryer to blow hot air into the charging port*

Use a hairdryer to blow hot air into the charging port. Constant push of hot air will start to heat the port and the air inside it.

This external heat source will heat the water drops inside the port and completely dry the lightning port.

Use this step cautiously.

But avoid too much heat as it might damage the surface of your device. There is no fixed amount set on how much heat can dry the charging port.

How to get water out of charging port quickly?

One of the best ways to get water out of the charging port is by breathing into it.

For more significant amounts of water, you can use a syringe with a small needle to remove them from the charging port.

How to get the moisture out of your Android phone's charging port?

You can use a small needle to clean the USB charging port on your device. You may also need to dry the charging port with a rag or some other means.

The latest Android devices have a liquid detection feature that, on detecting moisture, flashes a moisture notification.

Most liquid drops are minute in size, which forces the smartphone to indicate that the port is wet, and the android system will detect it.

How to remove water from the iPhone XS, iPhone Xs Max, and iPhone XR charging port?

The first step is to remove the apple lightning cable or the lightning accessory and locate the water in the iPhone charging port.

Do this by searching for a wet area near the port and placing a towel underneath the iPhone.

The last step would be to use a vacuum cleaner and dry vac to remove as much water as possible from the iPhone XS, iPhone Xs Max, and iPhone XR charging port.

Turn on or charge the phone only when the iPhone and lightning accessory are dry of any moisture.

The smartphone charging port can detect moisture and notify the user.

The phone can still give you moisture notifications even when completely dried. In that case, check your lightning connector.

Try disconnecting the lightning connector to disable moisture notification.

iPhone XS, iPhone Xs Max, and iPhone XR are water-resistant phones.

All these iPhone models don't get impacted by a small amount of moisture. In case they fail to turn on, contact customer support immediately.

How do I clean the charging port on a Samsung phone?

Samsung Galaxy smartphone and other android devices are capable of showing moisture warning messages or liquid detection alerts.

Whether it's the Samsung S10 or Galaxy S8, both models are water-resistant.

To clean the charging port of a Samsung smartphone. Use a dry cloth or towel to remove the water from the surface.
Use an air-tight bag, fill it with rice, and put your phone and seal the bag. Keep it like that for a few hours.

How to get water out of the phone's charging port without rice?

Getting water out of the phone's charging port with the rice is a time-consuming affair.

If you have plenty of time and can live without your phone for a day or two, then use the rice to dry the phone.

But if you cannot do that, then use the below methods instead of rice.

#1. Use a dry towel

Grab a dry towel and clean the phone charging port. Soak the spot of any residual water.

#2. Contact customer support

The ground impact can ruin the critical parts of the phone. Contact customer services in that case.

#3. Remove any debris stuck inside the charging port

Use any of the above ways out of these 15 easy ways to clean the lightning port.

#4. Just wait for the water to fall out of its own accord

Keep the phone turned off, and if you see the signs of perished water, turn it on. Check the warning notifications, if any.

What is inside the phone's charging port?

Inside your device's charging port, a sealing gasket prevents any moisture from seeping into the phone. All the latest phone charging ports get manufactured this way.

So, when your phone charging port gets damaged, don't worry if your device supports wireless charging.

For the time being, you can use this facility but prefer it in case of emergencies only. The moisture inside the phone might damage the phone panel.

Can water in the phone charging port damage it?

No, it cannot because the water in the charging port of mobile devices (phones, tablets, etc.) is a common occurrence. And such water will not affect any functions.

But, plenty of water in contact with the charging port for a long duration can inflict permanent damage.

A small amount of moisture does not affect the phone immediately.

What are the advantages of water-resistant phones?

Water-resistant phones can save your repairing costs that occur from moisture or spillage damage.
Also, the smartphone charging port is super easy to clean with a dry cloth.

If wet climate has damaged your previous phones owning to moisture,

It might be the right time to go for a water-resistant phone with wireless charging.

Can water damage Apple's lightning cable and lightning port?

Apple lightning cable is a passive object with no source of current without being power plugged. Even if the phone charging port is wet, it cannot damage the cable.

On the other hand, the lightning port can get damaged by prolonged exposure to water.

Buying a quality lightning accessory like a Qi-certified charger or a phone with a wireless charging feature can also reduce the risk of damage.

Can I charge my wet phone if the device supports wireless charging?

Don't charge your phone suddenly, even with the wireless charger, as there might be moisture present inside your phone.

If that's the case, you might get an electric shock or cause further damage to the device itself.

How do I clean an iPhone's lightning port?

To clean an iPhone's lightning port, use a cotton swab or microfiber cloth.

If you have time, take your phone to the Apple store, professionals can help you do it for you.

The use of sharp metal objects or scissors can scratch iPhones' delicate components.

Sharp metal objects can sometimes chip from inside the ports. A clean-up at the port can result in temporary damage.

What to do and avoid if water gets into your phone?

When one or all of your devices get exposed to water in the rain or on a beach. Your phone comes in danger of losing its functions.

You will start getting warning messages and on-screen moisture warnings.

Do not ignore these warnings and get on to the task of saving your smartphone or iPhone.

Below are some guidelines for keeping the phone functions intact.

If your phone falls in the water, turn it off immediately. Prompt action can save your phone.

Avoid electric shock by removing the charger or turning the phone off.

Keep the phone turned off until all the moisture is gone.

Vigorous shaking and aggressive blowing into the USB port or lightning accessory might damage it.

Water present in the charging port or the phone panel can cause permanent damage to the phone.

Seawater is more dangerous for mobile parts, especially the ports and electric circuits, than freshwater.

Keep an eye on the recent battery usage and phone warning about detected liquid after the cleaning process. Turn off again if the warning messages are still there.

Until the moisture is gone, avoid accessory connection, headphone jack, and supported device connection.